UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
5,077 Views
Registered: ‎05-03-2012

how to limit routing by pblock

Jump to solution

I need to force all routing of one module or partition to use only one pblock.

I need to save all routing outside the pblock clear.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Explorer
Explorer
8,440 Views
Registered: ‎05-03-2012

Re: how to limit routing by pblock

Jump to solution
0 Kudos
3 Replies
Teacher muzaffer
Teacher
5,055 Views
Registered: ‎03-31-2012

Re: how to limit routing by pblock

Jump to solution
Obviously that's not possible. Clock & IO will need to be routed to the pblock. What are you trying to accomplish by this very strict requirement?
- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
0 Kudos
Explorer
Explorer
5,047 Views
Registered: ‎05-03-2012

Re: how to limit routing by pblock

Jump to solution

you can implement partition without connected IO while clock is accessible in whole clock zone and neednt be routed

0 Kudos
Highlighted
Explorer
Explorer
8,441 Views
Registered: ‎05-03-2012

Re: how to limit routing by pblock

Jump to solution
0 Kudos