cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,045 Views
Registered: ‎03-19-2017

HLS module iteration number

Jump to solution

Dear,

I have a project require to call many times of hls::Dilate function for small gray 128x128 size picture.  Below for example:

...

hls::Dilate<hls::MORPH_RECT, iteration>(img_Y1, img_Y2, kernel3x3);

...

If I make the parameter of "iteration" to be 1, 2...5 are all properly, but the HLS compiler will failed when I set the "iteration" to be more than 100 or 1000...., why?

Note:My project setting is for Zynq AX7045.

0 Kudos
1 Solution

Accepted Solutions
nupurs
Moderator
Moderator
966 Views
Registered: ‎06-24-2015

p.ching.kuang@gmail.com 

 

Does it pass with any higher end device?
Does it fail C-simulation or C-synthesis?

Thanks,
Nupur
--------------------------------------------------------------------------------------------
Google your question before posting. If someone's post answers your question, mark the post as answer with "Accept as solution". If you see a particularly good and informative post, consider giving it Kudos (click on the 'thumbs-up' button).

View solution in original post

0 Kudos
1 Reply
nupurs
Moderator
Moderator
967 Views
Registered: ‎06-24-2015

p.ching.kuang@gmail.com 

 

Does it pass with any higher end device?
Does it fail C-simulation or C-synthesis?

Thanks,
Nupur
--------------------------------------------------------------------------------------------
Google your question before posting. If someone's post answers your question, mark the post as answer with "Accept as solution". If you see a particularly good and informative post, consider giving it Kudos (click on the 'thumbs-up' button).

View solution in original post

0 Kudos