UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Voyager
Voyager
2,630 Views
Registered: ‎07-06-2016

How to add TID signal to axi4-stream directive

Jump to solution

Hello,

 

I'm using Vivado HLS 2016.3 and I've implemented a axi4-stream interface directive in a custom IP module, but only has been implemented with the most common axi stream signals (TDATA, TLAST, TVALID...etc) and I'd like to add the TID for different channel selection, how can I do that?

 

Many thanks in advance.

 

0 Kudos
1 Solution

Accepted Solutions
Teacher muzaffer
Teacher
4,793 Views
Registered: ‎03-31-2012

Re: How to add TID signal to axi4-stream directive

Jump to solution

@joseer read ug902 section "AXI4-Stream Interfaces with Side-Channels"

- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

View solution in original post

1 Reply
Teacher muzaffer
Teacher
4,794 Views
Registered: ‎03-31-2012

Re: How to add TID signal to axi4-stream directive

Jump to solution

@joseer read ug902 section "AXI4-Stream Interfaces with Side-Channels"

- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

View solution in original post