UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor tavish_n
Visitor
152 Views
Registered: ‎06-06-2019

Is there any up to date documentation on using xfopencv samples with HLS? (not SDSoC)

Jump to solution

Hi,
I'm seeing references to old appnotes UG1167 etc. and bits and pieces about using the examples in https://github.com/Xilinx/xfopencv on some blogs, but it is not updated, and refeences SDSoC as a requirement for using any of them, whereas elsewhere it is mentioned that only HLS can also be used now (so I guess documentation has not been updated?). UG902 does not include any references to opencv or instructions on how to use it.

Is there a full example of accelerating a opencv operation using HLS available somewhere, long with the petalinux side of things?

Thanks and regards,

Tavish

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
111 Views
Registered: ‎05-27-2018

回复: Is there any up to date documentation on using xfopencv samples with HLS? (not SDSoC)

Jump to solution

Hi @tavish_n ,

     UG1233(V2019.1) is a up to date doc on xfopencv.You can choose to start with different platform using xfOpenCV such as SDsaccel, HLS, SDSoC.

     Hope this would be helpful~

Thanks,

Wen

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
如果提供的信息能解决您的问题,请标记为“接受为解决方案”。
如果您认为帖子有帮助,请点击“奖励”。谢谢!
-------------------------------------------------------------------------------------------------
0 Kudos
1 Reply
Moderator
Moderator
112 Views
Registered: ‎05-27-2018

回复: Is there any up to date documentation on using xfopencv samples with HLS? (not SDSoC)

Jump to solution

Hi @tavish_n ,

     UG1233(V2019.1) is a up to date doc on xfopencv.You can choose to start with different platform using xfOpenCV such as SDsaccel, HLS, SDSoC.

     Hope this would be helpful~

Thanks,

Wen

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
如果提供的信息能解决您的问题,请标记为“接受为解决方案”。
如果您认为帖子有帮助,请点击“奖励”。谢谢!
-------------------------------------------------------------------------------------------------
0 Kudos