UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Voyager
Voyager
882 Views
Registered: ‎05-30-2017

Grouping TIG NETS ISE 14.7 Spartan 6 XC6SLX150TFGG900

Jump to solution

Hello. I'm working with Spartan 6 XC6SLX150TFGG900 and ISE 14.7. I would to group some nets and assign them the TIG constrain so that are ignored the time requirments from these nets to each other nets of the design. I thought to do this appending to each of these nets the suffix  _TIG_ . For example:

 

"net_name1_TIG_"

"net_name2_TIG_"

"net_name3_TIG_"

.........

"net_name99_TIG_"

 

And then I thought to group the nets and apply constrains in the ucf in this way:

 

TIMEGRP "TN_TIG" = FFS(  " * / * _TIG_ / * " ) ;

 

TIMESPEC TS_TIG = FROM  " TN_TIG "  TIG;

 

Is this a good idea? There could be be problems resolving constains having underscores in the name of the nets? Is there a simpler and safer way to do what I want? Thank you.

 

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
1,425 Views
Registered: ‎08-01-2008

Re: Grouping TIG NETS ISE 14.7 Spartan 6 XC6SLX150TFGG900

Jump to solution

yes you can do it . Here some example 

 

https://www.xilinx.com/support/answers/2449.html

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
2 Replies
Xilinx Employee
Xilinx Employee
1,426 Views
Registered: ‎08-01-2008

Re: Grouping TIG NETS ISE 14.7 Spartan 6 XC6SLX150TFGG900

Jump to solution

yes you can do it . Here some example 

 

https://www.xilinx.com/support/answers/2449.html

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
Voyager
Voyager
847 Views
Registered: ‎05-30-2017

Re: Grouping TIG NETS ISE 14.7 Spartan 6 XC6SLX150TFGG900

Jump to solution

@balkris,

Thank you for the reply. Have a nice day!

0 Kudos