UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor mmaharjan
Visitor
17,825 Views
Registered: ‎02-06-2009

How to assign pins to data bus in ucf file

Jump to solution

Hi!

     I got an 16 bit data A(15:0) which I want to take out as output from my FPGA xc2Vp30 board. Can anyone tell me how to assign pins for the data bus in ucf file?

 

 

Milan

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
22,033 Views
Registered: ‎08-13-2007

Re: How to assign pins to data bus in ucf file

Jump to solution

The format is:

NET <SIGNAL_NAME> LOC = <PIN#>;

e.g.

NET  "ddr2_dq[0]"                                LOC = "C20" ;       #Bank 23

 

More information is available here:

http://toolbox.xilinx.com/docsan/xilinx10/books/docs/cgd/cgd.pdf (Constraints Guide)

 

There are also many examples in the reference designs for some of the boards, e.g. ML300, ML405, ML505,Spartan-3A Starter Kit, etc. e.g.

http://www.xilinx.com/products/boards/ml505/reference_designs.htm

 

bt

View solution in original post

2 Replies
Xilinx Employee
Xilinx Employee
22,034 Views
Registered: ‎08-13-2007

Re: How to assign pins to data bus in ucf file

Jump to solution

The format is:

NET <SIGNAL_NAME> LOC = <PIN#>;

e.g.

NET  "ddr2_dq[0]"                                LOC = "C20" ;       #Bank 23

 

More information is available here:

http://toolbox.xilinx.com/docsan/xilinx10/books/docs/cgd/cgd.pdf (Constraints Guide)

 

There are also many examples in the reference designs for some of the boards, e.g. ML300, ML405, ML505,Spartan-3A Starter Kit, etc. e.g.

http://www.xilinx.com/products/boards/ml505/reference_designs.htm

 

bt

View solution in original post

Visitor mmaharjan
Visitor
17,816 Views
Registered: ‎02-06-2009

Re: How to assign pins to data bus in ucf file

Jump to solution

Thanks a lot bt. It worked.

 

Milan

 

0 Kudos