UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor jbigo12
Visitor
205 Views
Registered: ‎02-13-2019

Use MIO to turn on LEDs on board Cora Z7

Hello everyone,

I am trying to control the output of the LEDs of my board with MIO, as shown in this example. The thing is that looking at the schematic of my Cora Z7 board, the LEDs do not appear in  the MIO bank.

Is it at all posssible that the board does not offer the possibility to configure MIO rgb leds as outputs?

Best regards.

 

MIO_bank.PNG
0 Kudos
2 Replies
Highlighted
170 Views
Registered: ‎06-21-2017

Re: Use MIO to turn on LEDs on board Cora Z7

Can you configure a bank of your PS GPIO as EMIO and declare the pins to be the ones that the LEDs are connected to?

Visitor jbigo12
Visitor
150 Views
Registered: ‎02-13-2019

Re: Use MIO to turn on LEDs on board Cora Z7

Hello @bruce_karaffa, it looks like you are pointing at the right direction.

I found this page that provides a set of guidelines to use GPIO via EMIO.

0 Kudos