UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer zxttao
Observer
4,068 Views
Registered: ‎06-12-2008

help ! core dumped in ise_10i_sp3 xflow.

run xflow in the ise_10i_sp3.  meet core dumped as below:

 

Is it tool issue ?  anyone can help me find out the reason ?

 

NING:Par:288 - The signal dc0_rg0_pclk_IBUF has no load. PAR will not attempt to route this signal.

WARNING:Par:288 - The signal dc1_rg0_pclk_IBUF has no load. PAR will not attempt to route this signal.

WARNING:Par:288 - The signal dc2_rg0_pclk_IBUF has no load. PAR will not attempt to route this signal.

WARNING:Par:288 - The signal rxclkin_IBUF has no load. PAR will not attempt to route this signal.

WARNING:Par:288 - The signal ext_pclk_ref0_in_IBUF has no load. PAR will not attempt to route this signal.

Starting Router

Phase 1: 730544 unrouted; REAL time: 5 mins 21 secs

Phase 2: 659471 unrouted; REAL time: 6 mins 13 secs

ERROR:Xflow - par: application received signal 11.

ERROR:Xflow:42 - Aborting flow execution...

0 Kudos
1 Reply
Historian
Historian
4,052 Views
Registered: ‎02-25-2008

Re: help ! core dumped in ise_10i_sp3 xflow.

I'd start by fixing the WARNINGs.

 

-a

----------------------------Yes, I do this for a living.
0 Kudos