cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ZhouSY
Newbie
Newbie
332 Views
Registered: ‎11-26-2020

hs_err

When I was running the route_design step, a hs_err occurred, had no error message in the Vivado environment and found the .dmp file where hs_err occurred in the project folder. I don't know what it means.

The version I use is Vivado2019.2, that uses MicroBlaze in its design. Will it affect more than that? Is there anything you need to pay attention to?

0 Kudos
Reply
2 Replies
syedz
Moderator
Moderator
321 Views
Registered: ‎01-16-2013

@ZhouSY 

 

This is a tool crash. when you rerun implementation, Does this crash at the same routing phase? Check if using a different router directive helps to complete the implementation. Can you share runme.log file present in <project_name>/<project_name>.runs/impl_1 folder?

Here is the general AR on debugging crash:

https://www.xilinx.com/support/answers/55854.html 

 

Try disabling multi-threading and see if it helps: https://www.xilinx.com/support/answers/50345.html 

 

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------
hongh
Moderator
Moderator
294 Views
Registered: ‎11-04-2010

Hi, @ZhouSY ,

Try the different route_design directives based on the placed dcp.

If the crash issue still occurs, please provide your placed dcp for further analysis.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Reply