UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
1,438 Views
Registered: ‎11-18-2017

ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution

I have a problem in my Xilinx. I'm using ISE Design Suite 14.7 and started 30day evaluation.

when I run(implement top module) I get this error below.

 

 

 

 

Release 14.7 Map P.20131013 (nt64)
Xilinx Mapping Report File for Design 'efe'

Design Information
------------------
Command Line : map -intstyle ise -p xc3s5000-fg900-4 -cm area -ir off -pr off
-c 100 -o efe_map.ncd efe.ngd efe.pcf
Target Device : xc3s5000
Target Package : fg900
Target Speed : -4
Mapper Version : spartan3 -- $Revision: 1.55 $
Mapped Date : Sat Nov 18 22:31:44 2017

Design Summary
--------------
Number of errors : 1
Number of warnings : 0

Section 1 - Errors
------------------
ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5),
ERROR:Map:258 - A problem was encountered attempting to get the license for this
architecture.

Section 2 - Warnings
--------------------
WARNING:Security:9b - No 'ISE' feature version 2013.10 was available for part
'xc3s5000'.

Section 3 - Informational
-------------------------
INFO:Security:56 - Part 'xc3s5000' is not a WebPack part.
INFO:Security:61 - The XILINXD_LICENSE_FILE environment variable is not set.
INFO:Security:63 - The LM_LICENSE_FILE environment variable is not set.
INFO:Security:68 - For more information or for assistance in obtaining
INFO:Security:68a - user is JAEWON, on host PCNAME.

 

 

 

 

I don't know how to fix this. Does anyone know the solution?

 

Sincerly

Jaewon Kim

pic1.png
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
1,341 Views
Registered: ‎06-14-2010

Re: ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution

 Hello @kimjaewon,

 

As already correctly indicated by other colleagues, as you are using a xc3s5000 in ISE, to successfully work with this device in ISE, you'd need a full ISE license for this, as there is no longer ISE 30-days evaluation license available. Yes, there is Vivado HLS and Vivado System Edition 30-days evaluation licenses, however these won't work for you in ISE.

How to get a full ISE license?

You see, these days, when you purchase a Vivado license, an ISE license comes with this license (not in the Vivado license itself, but as a separate license altogether) for free. 

Therefore, in order to obtain an ISE license, if you have already purchase a Vivado license, you'd then have received an ISE license of the same edition for free, that’d have been added to you licensing account.  

If you haven’t purchased any Vivado related licenses yet, and no plans in buying one any soon, then another suggestion for you is to switch to a smaller Spartan 3 device which is a support by ISE WebPACK license device (e.g. Spartan-3 FPGAs: XC3S50 – XC3S1500. For more supported by ISE WebPACK devices please see this pdf file: https://www.xilinx.com/publications/matrix/Software_matrix.pdf ). In this case, you can then generate and use an ISE WebPACK license for this. With that license and smaller device (e.g. XC3S1500) you’d then be able to overcome this issue.

 

Hope this helps.

 

Kind Regards,

Anatoli

Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
5 Replies
Moderator
Moderator
1,427 Views
Registered: ‎03-16-2017

Re: ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution

Hi @kimjaewon,

 

There are two issues here. 

 

1. The device which you are targetting is not supported by ISE webpack. ( Check this link for supported devices https://www.xilinx.com/publications/matrix/Software_matrix.pdf

2. And the license which you have added does not have ISE webpack feature. It shows that the license is for Vivado HLS.

You need to get the ISE webpack license from the Xilinx licensing website. 

( Check this link for it https://forums.xilinx.com/t5/Installation-and-Licensing/Finding-ISE-webpack-license/td-p/758406 )

 

Regards,

hemangd

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
Scholar jmcclusk
Scholar
1,413 Views
Registered: ‎02-24-2014

Re: ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution

Try setting the environmental variable

 

set XILINXD_LICENSE_FILE=c:\.Xilinx\Xilinx.lic

 

Also, check inside the license file to see if the xc3S500 feature exists in the file.  Also,  set your target device to a smaller Spartan3 device..   Does it work then?

 

It looks like you may have more than one license on your computer, in particular, you might have a Webpack license, and it's finding this one before the 30 day eval license.   

Don't forget to close a thread when possible by accepting a post as a solution.
Xilinx Employee
Xilinx Employee
1,405 Views
Registered: ‎08-01-2008

Re: ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution
Can you check if your system date and time are correct?

As per the xinfo and license file the start date is March 5th 2015, your system date should be greater than this inorder to use the license.

From the xinfo file the system date today seems to be 28th Feb 2014. If this is true please set the correct system date and restart ISE. See if this helps.
you may open license file in words and check dates
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
Highlighted
Moderator
Moderator
1,355 Views
Registered: ‎09-15-2016

Re: ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution

Hi @kimjaewon,

 

The Xilinx.lic attached shows this is Node-locked Vivado HLS 30-day evaluation license (As suggested by @hemangd). Also ISE Webpack does not support xc3s5000 device as per software matrix. You need a Design Suite to run it.

 

--------------------------------------------------------------
Please mark the appropriate answer as "Accept as solution" if information provided is helpful.
Give 'Kudos' to a post which you think is useful and reply oriented.
--------------------------------------------------------------

Moderator
Moderator
1,342 Views
Registered: ‎06-14-2010

Re: ERROR:Security:12 - No 'xc3s5000' feature version 2013.10 was available (-5)

Jump to solution

 Hello @kimjaewon,

 

As already correctly indicated by other colleagues, as you are using a xc3s5000 in ISE, to successfully work with this device in ISE, you'd need a full ISE license for this, as there is no longer ISE 30-days evaluation license available. Yes, there is Vivado HLS and Vivado System Edition 30-days evaluation licenses, however these won't work for you in ISE.

How to get a full ISE license?

You see, these days, when you purchase a Vivado license, an ISE license comes with this license (not in the Vivado license itself, but as a separate license altogether) for free. 

Therefore, in order to obtain an ISE license, if you have already purchase a Vivado license, you'd then have received an ISE license of the same edition for free, that’d have been added to you licensing account.  

If you haven’t purchased any Vivado related licenses yet, and no plans in buying one any soon, then another suggestion for you is to switch to a smaller Spartan 3 device which is a support by ISE WebPACK license device (e.g. Spartan-3 FPGAs: XC3S50 – XC3S1500. For more supported by ISE WebPACK devices please see this pdf file: https://www.xilinx.com/publications/matrix/Software_matrix.pdf ). In this case, you can then generate and use an ISE WebPACK license for this. With that license and smaller device (e.g. XC3S1500) you’d then be able to overcome this issue.

 

Hope this helps.

 

Kind Regards,

Anatoli

Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------