UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor hatlab_jpc
Visitor
657 Views
Registered: ‎07-16-2018

Failed in generating firmware " opt_design failed "

Hi,

 

I'm using Keysight M3602A design environment to generate the firmware for our Keysight M3102A Digitizer (with Xilinx 7K410T FPGA). We followed the instruction in the document of M3602A, installed Vivado 2015.2 and got the web pack license. However, the generating process always fails at 36% with an Error says "ERROR: [Common 17-345] A valid license was not found for feature 'Implementation' and/or device 'xc7k410t-ffg676'."

 

The document from Keysight only says we need the web pack license and doesn't mention any other licenses we need. I'm wondering is this the problem of the missing license or our setting... 

 

Attached is the screenshot and log file of the failed process. Please help.

 

Thank you.

 

Sincerely,

Chao Zhou

Capture.PNG
0 Kudos
4 Replies
Scholar drjohnsmith
Scholar
634 Views
Registered: ‎07-09-2009

Re: Failed in generating firmware " opt_design failed "

check is that version of the chip supported in that version of vivado web pack ?

 

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
0 Kudos
Highlighted
Visitor hatlab_jpc
Visitor
623 Views
Registered: ‎07-16-2018

Re: Failed in generating firmware " opt_design failed "

yep, we have already checked

Xilinx Employee
Xilinx Employee
589 Views
Registered: ‎03-07-2018

Re: Failed in generating firmware " opt_design failed "

Hi @hatlab_jpc

 

Try installing Vivado 2015.2 update

 

Regards,

Bhushan

-------------------------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------------------------

Regards,
Bhushan

-------------------------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
536 Views
Registered: ‎06-14-2010

Re: Failed in generating firmware " opt_design failed "

Hello @hatlab_jpc,

 

Please note that Kintex 7 7k410t part isn't a webpack part, so a webpack license won't be valid here. A full license is required here or a device locked license locked to 'xc7k410t-ffg676', in order to overcome this issue.

 

Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------