10-18-2016 09:44 PM
I originally installed ISE 11.1 System Edition on a PC running Windows XP. I was using update 11.4. That PC has just crashed so I have to reinstall System Edition 11.1 on another PC running Windows 10. I ran the DVD and got to the "Select products to install" page. Only ISE Design tools, Plan Ahead and Chipscope Pro were available. EDK and DSP tools did not show up. Why is this happening?
10-18-2016 09:47 PM
Windows10 is not supported for ISE so may lead to unexpected result.
Please go through http://www.xilinx.com/support/answers/62380.html and see if it helps.
10-18-2016 10:16 PM
10-18-2016 10:20 PM
As arpansur mentioned before, Windows 10 is not supported for ISE.
However, if you want to install ISE on Windows 10, I recommend that you use Virtual Machine, like VM ware and/or Virtual Box and you choose guest OS as Linux, ex. CentOS, OpenSUSE and so on.
I'm sure that you can use ISE on your Windows 10 PC.
10-19-2016 05:46 PM
As balkris mentioned before, I recommend that you use ISE 14.7 on Windows 7.
As you know, ISE 14.7 is only supported by Xilinx and Xilinx stop any improvement and so on.
So if you want to use ISE, please use ISE 14.7 and supported OS, like Windows 7.
10-20-2016 09:06 PM
Thank you all for your replies. Unfortunately my license doesn't cover ISE 14.7. I only need ISE 11.4 to maintain a project on a Virtex 5 device. Once I start a new project on one of the latest devices I am going to purchase Vivado.
I nearly managed to get everything installed using the link Arpan supplied. I installed ISE 11.1 on Windows 10 using the setup from the 32-bit directory on the installation DVD. Now I just need to upgrade to 11.4 so that I can link System Generator with Matlab 2009b. This was the design flow I used before my old PC crashed. I downloaded the 11.4 ISE product update for Windows 64-bit together with the ISE design suite shared components. I installed both of them. All ISE components were updated to 11.4 except System Generator which stayed at 11.1. Is there anything else I can do to bring System Generator up to 11.4? I couldn't launch XilinxUpdate from the ISE project navigator. I got an exception when I tried. I also tried running the ISE 11.4 product update for Windows 32-bit but that failed to start.