11-27-2009 11:08 AM
11-29-2009 11:14 AM
11-30-2009 10:16 AM
I had 11.3 installed on a Dell XPS 16 laptop running Vista w/ SP1. I installed Windows 7 Home Premium on top of it. After the install I was not able to run ISIM - it was missing from the system and no amount of tuning would get it running again. So I uninstalled ISE completely and tried to install from scratch. Now things are even worse. The system brings up a dialog box asking if I want to run the installer. I tell it proceed and then nothing; no disk activity no process running in the task manager; nothing. Any idea as to what I can try next?
Windows 7 is not a supported operating system ...
11-30-2009 09:50 PM
12-05-2009 07:54 PM
ack, I'm sorry that didn't work. i just ran into problems too. My SysGen stopped working after I restarted my computer. I reinstalled the program and it worked, but then when I restarted again, it stopped working. I couldn't compile any models; I got an error about it not finding a "ptable_"
12-17-2009 02:10 PM
12-17-2009 02:19 PM
12-19-2009 01:51 PM
These settings work for me:
There was a folder called "11.1_wiclient" in My Documents - I think this is the automatic online installer (~214MB).
Open the folder, go to bin -> nt.
Then right-click "xsetup", and under the Compatibility tab, check the settings for "Windows XP (Service Pack 2)".
Then when I started Xilinx, I could select ISim from the Design Properties window.
I'm running Windows 7 (64 bit).
02-25-2010 12:11 PM
Thanks you ymsyb I have successfully installed Xilinx 11.1 on my laptop running Windows 7 professional (64 bit edition). It seems to work properly.
There was just an error during installation:
DriverInstaller->Dest Path = C:\Windows\system32\drivers\xpc4drvr.sys
DriverInstaller->Source Path = C:\Xilinx\11.1\common\bin\nt\xpc4drvr.sys
File C:\Windows\system32\drivers\xpc4drvr.sys not found.
File version of C:\Xilinx\11.1\common\bin\nt\xpc4drvr.sys is 1040.
DriverInstaller->XilinxPC4Driver StartService failed (1275).
DriverInstaller->XilinxPC4Driver First State = 1.
DriverInstaller->XilinxPC4Driver not started 1.
Error occurred during driver installation.
06-21-2011 03:13 AM
open Xilinx folder and bin
in the folder bin - nt - rightclick _setup - select troubleshoot compatibility then follow the instructions. you can install now.
03-19-2012 06:15 AM
I am trying to install XSG 11.1 version on my computer with OS windows 7.
But tool box is not get installed in my matlab.matlab version I have is 2008a. I tried to install it manytimes....
Can anyone give suggestions for me....
Thanks in advance
03-22-2012 07:36 AM
Open cmd promt in windows as an admin. Direct path to the xilinx installation directory. Write cmd wdreg and enter. You will get all commands related to wdreg. Please try following and i am sure it will work fine.
(1) In a command prompt browse to your C:\Xilinx\13.2\ISE_DS\ISE\bin\nt64 directory on 64 bit installs or C:\Xilinx\13.2\ISE_DS\ISE\bin\nt on 32 bit installs
(2) To uninstall type the command - wdreg -compat -inf %cd%\windrvr6.inf uninstall
(3) To reinstall type the command - wdreg -compat -inf %cd%\windrvr6.inf install