cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
281 Views
Registered: ‎07-24-2020

Valid License not found

Jump to solution

Hi, 

I successfully synthesize my design on 'xcku5pffva676-3' but received below error message when attempting to synthesize on 'xcvu440-flga2892-3-e'. However, I have a valid license of type 'Vivado HL Design Edition Node-Locked License '.  Any help would be appreciated.

 

Attempting to get a license for feature 'Synthesis' and/or device 'xcvu440'
WARNING: [Common 17-348] Failed to get the license for feature 'Synthesis' and/or device 'xcvu440'. Explanation: The license feature Synthesis could not be found.
Resolution: Check the status of your licenses in the Vivado License Manager. For debug help search Xilinx Support for "Licensing FAQ".
0 Infos, 1 Warnings, 0 Critical Warnings and 1 Errors encountered.
synth_design failed
ERROR: [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xcvu440'. Please run the Vivado License Manager for assistance in determining
which features and devices are licensed for your system.
Resolution: Check the status of your licenses in the Vivado License Manager. For debug help search Xilinx Support for "Licensing FAQ". If you are using a license server, verify that the license server is up and running a version of the xilinx daemon that is compatible with the version of Xilinx software that you are using. Please note that Vivado 2017.3 and later requires upgrading your license server tools to the Flex 11.14.1 tools. Please confirm with your license admin that the correct version of the license server tools are installed.
INFO: [Common 17-206] Exiting Vivado at Fri Jul 24 10:08:51 2020...

 

 

Thanks,

Prasanna

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
159 Views
Registered: ‎12-04-2019

Hi @Prasanna_K ,

Thanks for sharing the requested files.

As you have mentioned earlier that you have a VIvado_Design_Edition license but the shared license file is of Encryptedwriter_v2 as can be seen in the snapshot below.

Capture.JPG

With this license file, you won't be able to use xcvu440, for using this part you will need to generate either Design_edition or system_edition license file from the Xilinx product licensing page.

https://www.xilinx.com/getlicense

Licenses can be generated as Node-locked or as a Floating, refer to the following AR for a detailed explanation on this.

https://www.xilinx.com/support/answers/40131.html

Please let me know if you face this license issue again even after generating the new valid license file, I will be glad to help you.

 

Regards,

Ansari Hunen  

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as a solution.
-------------------------------------------------------------------------

View solution in original post

3 Replies
Highlighted
Xilinx Employee
Xilinx Employee
188 Views
Registered: ‎12-04-2019

Hi @Prasanna_K ,

XCKU5P comes under Webpack and starting from 2016.x onwards, a license is no longer required for Webpack that's the reason you are not getting license error when using this part as mentioned in the UG973 page 8.

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_2/ug973-vivado-release-notes-install-license.pdf

whereas XCVU440 does not come under Webpack and will require a valid license with a valid version limit, please check the below AR on a valid version limit.

https://www.xilinx.com/support/answers/33770.html

Since you have a node-locked license, it can be directly copied to VLM, follow the below steps to do so.

Open Vivado --> Help --> Manage License --> Load License

After setting up the license, I would recommend you to close all the Xilinx related tools and re-start Vivado for those license to be effective

If you have a valid license and still you are getting a license not found error, then please share the following files to check this.

1. License file.

2. Run the below command from Vivado TCL console and share the generated Xinfo.txt file, run pwd to know the location of this file.

report_environmnet -file xinfo.txt

 

Thanks and Best Regards,

Ansari Hunen

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as a solution.
-------------------------------------------------------------------------

 
 

 

0 Kudos
Highlighted
Observer
Observer
180 Views
Registered: ‎07-24-2020

Hi @ansarimo ,

 

Please find attached requested file for your reference. 

 

Regards,

Prasanna

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
160 Views
Registered: ‎12-04-2019

Hi @Prasanna_K ,

Thanks for sharing the requested files.

As you have mentioned earlier that you have a VIvado_Design_Edition license but the shared license file is of Encryptedwriter_v2 as can be seen in the snapshot below.

Capture.JPG

With this license file, you won't be able to use xcvu440, for using this part you will need to generate either Design_edition or system_edition license file from the Xilinx product licensing page.

https://www.xilinx.com/getlicense

Licenses can be generated as Node-locked or as a Floating, refer to the following AR for a detailed explanation on this.

https://www.xilinx.com/support/answers/40131.html

Please let me know if you face this license issue again even after generating the new valid license file, I will be glad to help you.

 

Regards,

Ansari Hunen  

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as a solution.
-------------------------------------------------------------------------

View solution in original post