UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
331 Views
Registered: ‎03-13-2019

XLCM shows license but part not in ISE

Jump to solution

Recently I purchased an ML605 dev board. I've installed ISE 14.7 on my computer (Ubuntu 18). I redeemed the voucher for the board and loaded the license into the Xilinx license manager. The license manager shows the license. However, when creating a new project in ISE, I cannot select the correct part. It only gives me the webpack version. If I select the ML605 dev board it still uses the incorrect webpack part. See attachments for license manager and ise windows. 

ISE.png
XLCM.png
0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
278 Views
Registered: ‎07-16-2008

回复: XLCM shows license but part not in ISE

Jump to solution

If you selected WebPACK edition to install, only WebPACK devices will be added despite of your license file.

You may want to re-install ISE and select at least logic edtion to enable devices in full product.

install_edition_list.jpg

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
5 Replies
Xilinx Employee
Xilinx Employee
301 Views
Registered: ‎07-16-2008

回复: XLCM shows license but part not in ISE

Jump to solution

Are you able to see the XC6VLX240T in the device selection list?

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
296 Views
Registered: ‎03-13-2019

回复: XLCM shows license but part not in ISE

Jump to solution

No that is the problem I'm having. The device shown is the only virtex 6 that is available. 

0 Kudos
Xilinx Employee
Xilinx Employee
286 Views
Registered: ‎07-16-2008

回复: XLCM shows license but part not in ISE

Jump to solution

Could it be that you selected ISE WebPACK in Edition list in the installation?

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
284 Views
Registered: ‎03-13-2019

回复: XLCM shows license but part not in ISE

Jump to solution

That is probably what I did. Given that I have a voucher should I have selected something different during installation? Wouldn't adding the license unlock the other devices after installation? 

0 Kudos
Xilinx Employee
Xilinx Employee
279 Views
Registered: ‎07-16-2008

回复: XLCM shows license but part not in ISE

Jump to solution

If you selected WebPACK edition to install, only WebPACK devices will be added despite of your license file.

You may want to re-install ISE and select at least logic edtion to enable devices in full product.

install_edition_list.jpg

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------