cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mishal_goel
Visitor
Visitor
313 Views
Registered: ‎03-22-2021

Xilinx ISE 3.3SP3 Download Issue

Hello,

I downloaded Xilinx ISE 3.3SP3 from the ISE Archive and encountered 2 issues.

1) When downloading from the website (https://www.xilinx.com/downloadNav/vivado-design-tools/archive-ise.html), it downloads Xilinx version 9.2i.

2) When I try to run iMPACT, I get the following error: The procedure entry point ??9PathListIterator@Port@@QBE_NABV01@@Z could not be located in the dynamic link library libPortability.dll

The 2nd error is more critical for my operations, so any help would be greatly appreciated!

Thanks!

0 Kudos
3 Replies
drjohnsmith
Teacher
Teacher
288 Views
Registered: ‎07-09-2009

Wow thats old,

which OS are you trying to run it on ?

it certainly wont run on W10 , and I doubt W7 ,

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
0 Kudos
mishal_goel
Visitor
Visitor
284 Views
Registered: ‎03-22-2021

The computer is running Windows XP.

ansarimo
Xilinx Employee
Xilinx Employee
154 Views
Registered: ‎12-04-2019

Hi @mishal_goel 

Thanks for confirming the OS, the following AR lists the supported OSs for the corresponding ISEs:

https://www.xilinx.com/support/answers/18419.html

Instead of using ISE 9.2, I would recommend using ISE 14.7 as it can be installed on Windows XP pro.

If you only want to use IMPACT and Chipscope pro, you can download and install the Lab tools of ISE 14.7 instead of downloading the entire SW.

https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive-ise.html

ansarimo_0-1617258351906.png

 

Hope this helps.

 

Thanks & Regards,

Ansari Hunen

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as a solution.
-------------------------------------------------------------------------