write_bitstream ERROR

[qile10234]

Hi,I'm sure I have install the v_cresample Hardware Evaluation.But when I Implementation it still appear ERROR: [Common 17-69] Command failed: This design contains a core for which bitstream generation is not supported:tutorial_i/zed_hdmi_display/v_cresample (v_cresample Version 4).Oh,the version of my vivado is 2014.2.

[vemulad]

Hi,

Go to Tools --> Report --> Report IP status. In the IP status window you can find the license type used for generating this IP. If you see design linking here then try regenerating the IP output products and rerun the flow. Check if this helps.

If the above does not work, then run report_environment command  in Vivado TCL console and attach the log here.

Thanks,

Deepika.

[ashishd · Accepted solution]

Hello,

Can you please try regenerating output products for the core and try again? To regenerate output products select below options by right clicking core –

1. Select “Reset Output Products”
2. Select “Generate Output Products”

[qile10234]

It workd !Thank you very much.

[qile10234]

I regenerator the core it works  thank you very much.

[arttatran]

Hi,

I am getting the bit stream error for v_cresample is not supported......

but i have done these steps but not succeess.......

Go to Tools --> Report --> Report IP status. In the IP status window you can find the license type used for generating this IP. If you see design linking here then try regenerating the IP output products and rerun the flow.

i have check the report that shows the design linking......

so plz help me in this regard if possible....

Thank u

Arttatran

[ashishd]

Hello @arttatran,

It is always recommended to open new thread for fresh query. 

So with the new thread, attach the output file of below command -

report_environment -file <directory_name>/xinfo.txt

[anpingbo]

I encounter the same problem, and tried to regenerate the outputs of hardware but didnot work........   do you solve this problem?