UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
239 Views
Registered: ‎06-07-2011

Zedboard DPU

Jump to solution

I am looking at getting the DPU running on the Zedboard, I have downloaded the DNNDK 3.1 image file and have got that running successfully, but I would like to build my own version to better understand how it all goes together.

I have looked at the TRD and other documentation trying to understand it, but most of it is aimed at the Ultrascale devices, so I'd like some guidance on how to connect the DPU to the Zynq processor.

0 Kudos
1 Solution

Accepted Solutions
Participant jorge_2015
Participant
186 Views
Registered: ‎12-06-2017

Re: Zedboard DPU

Jump to solution

I found this repo https://github.com/alexhegit/zc702_dpu140_trd/blob/master/Hands-On.md a while ago it is based on zynq zc702 so you can use it as zedboard reference.

0 Kudos
2 Replies
Participant jorge_2015
Participant
187 Views
Registered: ‎12-06-2017

Re: Zedboard DPU

Jump to solution

I found this repo https://github.com/alexhegit/zc702_dpu140_trd/blob/master/Hands-On.md a while ago it is based on zynq zc702 so you can use it as zedboard reference.

0 Kudos
Contributor
Contributor
165 Views
Registered: ‎06-07-2011

Re: Zedboard DPU

Jump to solution
Excellent, thanks, just what I was looking for.
0 Kudos