10-20-2017 04:51 AM
I'm using Vivado 2017.2 MIG 7 series IP to generate memory interface for DDR2 SDRAM, on Kintex-7.
Does anybody knows if it is possible to generate memory interface for MT47H64M8SH-25E, providing correct parameters, and selecting MT47H64M16XX-25/25E?
Thank you in advance.
10-20-2017 10:44 AM - edited 10-20-2017 11:02 AM
Do you have 2017.2 installed? If so why not just test out Vivado and whip out the MIP IP select your basic settings then on the memory device page see if that part is selectable... If you don't, check out this article as well as this one for the actual list. Do note you can create custom parts if not shown there as well. View the Memory design assistant articles for more info.
From the IP it looks like the base MT47H64M8SH-25 is supported.
03-06-2019 06:37 PM
You can refer to document UG586 to learn the interface. You can also right-click the MIG IP (.xci file) to generate a IP example design.