UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
377 Views
Registered: ‎08-15-2014

How to disable dbg_hub when using MIG

Jump to solution

HI,

I am using MIG DDR3 in my design, but I found each time the tool will add a module named as dbg_hub, how to disable it?

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
335 Views
Registered: ‎07-23-2015

Re: How to disable dbg_hub when using MIG

Jump to solution

@jeffson You can't since the XSDB which is always used in MIG IP (in Ultrascale family) requires it. Below is the AR that explains it 

https://www.xilinx.com/support/answers/63103.html

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
1 Reply
Moderator
Moderator
336 Views
Registered: ‎07-23-2015

Re: How to disable dbg_hub when using MIG

Jump to solution

@jeffson You can't since the XSDB which is always used in MIG IP (in Ultrascale family) requires it. Below is the AR that explains it 

https://www.xilinx.com/support/answers/63103.html

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos