cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ssampath
Voyager
Voyager
1,327 Views
Registered: ‎10-12-2016

about DDR controller input clock(generated by MIG) ?

Jump to solution

Hi Friends,

 

I have generated DDR3L memory controller and PHY using MIG. for this testing purpose i used on board differential clock as input to the controller.

But later can i use internal clock , like clock generated from MMCM or PLL . ?

 

 

Thank You 

S Sampath 

 

 

-Sampath
0 Kudos
1 Solution

Accepted Solutions
vemulad
Xilinx Employee
Xilinx Employee
1,586 Views
Registered: ‎09-20-2012

Hi @ssampath

 

Yes, it is possible to use internally generated clock with 7 series MIG sys_clk input. However this is not recommended.

Thanks,
Deepika.
--------------------------------------------------------------------------------------------
Google your question before posting. If someone's post answers your question, mark the post as answer with "Accept as solution". If you see a particularly good and informative post, consider giving it Kudos (the star on the left)

View solution in original post

0 Kudos
1 Reply
vemulad
Xilinx Employee
Xilinx Employee
1,587 Views
Registered: ‎09-20-2012

Hi @ssampath

 

Yes, it is possible to use internally generated clock with 7 series MIG sys_clk input. However this is not recommended.

Thanks,
Deepika.
--------------------------------------------------------------------------------------------
Google your question before posting. If someone's post answers your question, mark the post as answer with "Accept as solution". If you see a particularly good and informative post, consider giving it Kudos (the star on the left)

View solution in original post

0 Kudos