UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
775 Views
Registered: ‎02-16-2014

ZCU104 SODIMM

Jump to solution

Trying to change PL DDR4 controller to work with SODIMM we got (also Micron but 8GB), but pretty much all options in MIG are "greyed out".

 

So 4GB Micron is the only part supported out of the box right now? Or am I missing something?

 

 

0 Kudos
1 Solution

Accepted Solutions
Scholar jmcclusk
Scholar
938 Views
Registered: ‎02-24-2014

Re: ZCU104 SODIMM

Jump to solution

I was able to select the MTA18ASF1G72HZ-2G3 in MIG using Vivado 2018.1 after setting the design target to the ZCU104.  The smallest clock cycle is only 938 ps, though.    See below:

 

ddr4.png

Don't forget to close a thread when possible by accepting a post as a solution.
1 Reply
Scholar jmcclusk
Scholar
939 Views
Registered: ‎02-24-2014

Re: ZCU104 SODIMM

Jump to solution

I was able to select the MTA18ASF1G72HZ-2G3 in MIG using Vivado 2018.1 after setting the design target to the ZCU104.  The smallest clock cycle is only 938 ps, though.    See below:

 

ddr4.png

Don't forget to close a thread when possible by accepting a post as a solution.