UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
7,601 Views
Registered: ‎04-17-2014

write for ddr3

HI,Everyone,I have a questuon that the data I need can not be read when I write data to ddr3 continuously.Only when app_rdy is deasserted and then pull up(hold app_en high along with the valid command and address value ) ,My need data can be read correctly.Then app_rdy is high continuously ,the read data is unchanged.I think that if the non back to back command and bakc to back command is different ?

Tags (1)
0 Kudos
1 Reply
Contributor
Contributor
7,550 Views
Registered: ‎04-17-2014

Re: write for ddr3 on MIG

wr.PNGrd.PNG

I only can read the data in address of 8 and 72 ,I am very confused.

0 Kudos