UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
429 Views
Registered: ‎03-29-2017

Aurora_Single Mode SFP selection in KINTEX KC705

I am using a SFP [EOLS-PX-GU-20] which has different data rates:2.48832Gbps upstream and 9.95328Gbps downstream. Is their any possibility to use that SFP in KINTEX KC705.

0 Kudos
3 Replies
Moderator
Moderator
403 Views
Registered: ‎02-16-2010

Re: Aurora_Single Mode SFP selection in KINTEX KC705

What is your design target line rates? With Aurora, you will need to have Tx and Rx to be at same line rate.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Explorer
Explorer
393 Views
Registered: ‎03-29-2017

Re: Aurora_Single Mode SFP selection in KINTEX KC705

In Kintex KC705, I need to use different data rates:2.48832Gbps upstream and 9.95328Gbps downstream in Aurora Protocol. Is it possible or not ?

 

 

0 Kudos
Moderator
Moderator
383 Views
Registered: ‎02-16-2010

Re: Aurora_Single Mode SFP selection in KINTEX KC705

Aurora IP does not have the option to have Tx and Rx at different data rates. You use case will require adjusting the clocking and GT parameters for either upstream or downstream.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos