UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
195 Views
Registered: ‎05-03-2018

DisplayPort RX Subsystem v2.1 - Core Problems - IBERT Implementation

Hello,

I would like to try to integrate the IP core IBERT into my project: in another project it helped me.
But we had used it standalone, without our application.


In this case instead we would like to use it leaving our macro display port which is the problematic object.
Can we do or should we remove the video phy to do it?
Also the project with the display port can be compiled without phy video?

 

Thanks in advance,
Andrea

0 Kudos
1 Reply
Highlighted
Moderator
Moderator
156 Views
Registered: ‎11-09-2015

Re: DisplayPort RX Subsystem v2.1 - Core Problems - IBERT Implementation

Hi @andreac_avnet ,

The displayport Subsystem has to be used with the Video Phy. It does not makes sense to have the DP SS without the phy as this is a connectivity IP thus you need the GTs.

Why do you need to use gthe IBERT?

Did you ever consider to use the xapp1295 if you need to have debug the GTs?

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**