UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
7,078 Views
Registered: ‎04-17-2014

LogiCORE IP Tri-Mode Ethernet MAC v8.2 example design

I recently purchased the TEMAC core to implement an RGMII Ethernet interface on a Kintex-7.  The product guide refers to an example design, but I when I generate the core (targeted to a part or to a board), I cannot find any example design files being generated.

 

How do I get/find these files?

 

Dave

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
7,077 Views
Registered: ‎02-06-2013

Re: LogiCORE IP Tri-Mode Ethernet MAC v8.2 example design

Hi Dave,

 

After generating the core,you need to right click on the xci file  which will show you the option of example design as shown in the below snapshot.

 

temac_ex.png

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
0 Kudos