UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer trox_1
Observer
5,739 Views
Registered: ‎10-28-2013

SRIO connect to AXI-Lite interface

Jump to solution

Hi! Tools - Vivado 2013.3. SRIO Gen.2 (v.3.0). How to connect SRIO core to the Microblaze processor. AXI-Lite interface is available (SRIO core) but there is no clock signal (s_axi_aclk) ?

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
9,056 Views
Registered: ‎02-06-2013

Re: SRIO connect to AXI-Lite interface

Jump to solution

Hi

 

The log_clk_out will be used for the Axi lite interconnect Master interface axi clock.

 

 

 

Have a look at the attached snapshot showing the connections from the Microblaze to an interconnect and to the axi lite interface of the SRIO core and the clock connections.

 

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
SRIO_Microblaze.png
0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
9,057 Views
Registered: ‎02-06-2013

Re: SRIO connect to AXI-Lite interface

Jump to solution

Hi

 

The log_clk_out will be used for the Axi lite interconnect Master interface axi clock.

 

 

 

Have a look at the attached snapshot showing the connections from the Microblaze to an interconnect and to the axi lite interface of the SRIO core and the clock connections.

 

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
SRIO_Microblaze.png
0 Kudos
Observer trox_1
Observer
5,707 Views
Registered: ‎10-28-2013

Re: SRIO connect to AXI-Lite interface

Jump to solution

Hi! Thanks for the quick reply. Another issue - how to connect s_axi_maintr_rst?  (// Reset for maintr interface, on LOG clk domain). Thanks in advance.

0 Kudos