UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
210 Views
Registered: ‎10-12-2018

SelectIO serial interface

Hi,

Which is the highest level and, simplest way to implement serial interface which uses selectIO resources, and uses scrambling, or DC balanced coding?

I need to implement a serial connection between two FPGAs with the following specification:

  • The interface must use selectIO  (not transciever. The bandwidth and throughput is not critical.)
  • The two boards are DC isolated (the interface connected with capacitors), so I need scrambling or 8/10B coding.
  • The host interface should be AXI (stream or light)

I need a selectIO alternative of aurora, or a scrambled alternative of UART.

I can implement an interface using separate blocks (selectIO wizard, PCS, AXI interface), but is there any built-in (or third party) IP which fits requirements above.

0 Kudos