UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor rkutty
Visitor
423 Views
Registered: ‎05-18-2011

jesd204_phy v3.4 ZC706/ZCU102

 

JESD204 PHY porting from ZC706 to ZCU102

 

ERROR: [IP_Flow 19-3461] Value '500.000' is out of the range for parameter 'RX GT REFCLK FREQ(RX_GT_REFCLK_FREQ)' for BD Cell 'axi_daq2_xcvr' . Valid values are - 200, 250, 312.5, 333.3333333, 400, 416.6666667, 500, 625, 666.6666667
ERROR: [IP_Flow 19-3461] Value '3' is out of the range for parameter 'PLL Type(RX_PLL_SELECTION)' for BD Cell 'axi_daq2_xcvr' . Valid values are - 1, 2, 0

For ZC706 (GTX), the value must be 500.000

For ZCU102 (GTH), the value must be 500

 

(have to add a TCL regexp to strip 500.000 to 500) -- 

 

I would have expected at the minimum -

CPLL(GTX) -> CPLL (GTH)  -> 0

QPLL(GTX) -> QPLL0 (GTH)  -> 3

 

ERROR -> QPLL1(GTH)  -> 2

 

Now again another context switching for Ultrascale.

 

Must be intentional with a reason -- IP should not be portable across devices?

 

 

 

0 Kudos