UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor ld01422
Visitor
500 Views
Registered: ‎06-13-2017

question about bullseye

hello, I want to know about bullseye connection for vcu108 EV board

 

Is it possible chip to chip connection between vcu108 and vcu108 or other FPGA board which has bullseye connection?

 

is there any tutorial or example code for that?

 

I want to send and receive AXI4 interface between vcu108 and vcu108 board.

 

add, where can I buy bullseye cable for vcu108 ?. it is hard to find the shop and our offline xilinx support has no idea of that.

 

thank you.

0 Kudos
1 Reply
Moderator
Moderator
469 Views
Registered: ‎07-30-2007

Re: question about bullseye

The bullseye cables generally only connect the Gigabit transceivers.  You could use a protocol such as aurora to have the boards communicate through the GTs but you won't have normal IO.  Look at the aurora product guide for more information PG046.  The IP catalog will have aurora IP and example designs and aurora can connect to AXI.

Roy


----------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution
----------------------------------------------------------------------------


0 Kudos