UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer kmshah93
Observer
167 Views
Registered: ‎08-12-2019

Developer Tool for Spartan-3 XC3S1500

Jump to solution

Hi,

I have Spartan-3 FPGA, for which I had downloaded Xilinx ISE 14.7.

But it seems that 14.7 does not support Spartan-3. Also for Vivado tool, I read that it's only for Spartan-7 and above.

So which tool should I use for my Spartan-3 FPGA?

0 Kudos
1 Solution

Accepted Solutions
118 Views
Registered: ‎01-22-2015

Re: Developer Tool for Spartan-3 XC3S1500

Jump to solution

@kmshah93 

That is correct.  There are no Xilinx tools for Windows-10 that support the Spartan-3.

Mark

0 Kudos
5 Replies
131 Views
Registered: ‎01-22-2015

Re: Developer Tool for Spartan-3 XC3S1500

Jump to solution

@kmshah93 

Welcome to the Xilinx Forum!

Table 2-1 in Xilinx document, UG631, shows the XC3S1500 is supported by ISE v14.7.

Table 1 in Xilinx document, UG973, shows the XC3S1500 is NOT supported by the latest version of Vivado.

Cheers,
Mark

0 Kudos
Observer kmshah93
Observer
127 Views
Registered: ‎08-12-2019

Re: Developer Tool for Spartan-3 XC3S1500

Jump to solution

Hi,

Yes for Windows 10, it does not work. Whats the tool for Windows 10?

Here is the relevant link - https://www.xilinx.com/support/answers/72606.html

0 Kudos
123 Views
Registered: ‎01-22-2015

Re: Developer Tool for Spartan-3 XC3S1500

Jump to solution

@kmshah93 

-see supported "Operating Systems" in Chapter 2 of UG631, which include Windows-7 and Windows-XP but NOT Windows-10.

Mark

 

0 Kudos
Observer kmshah93
Observer
121 Views
Registered: ‎08-12-2019

Re: Developer Tool for Spartan-3 XC3S1500

Jump to solution

Hi Mark,

Yes I have read that. So do you mean that Xilinx doesn't provided any tool for Spartan 3 FPGAs in Windows 10?

Just confirming it.

0 Kudos
119 Views
Registered: ‎01-22-2015

Re: Developer Tool for Spartan-3 XC3S1500

Jump to solution

@kmshah93 

That is correct.  There are no Xilinx tools for Windows-10 that support the Spartan-3.

Mark

0 Kudos