cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
255 Views
Registered: ‎08-12-2019

Developer Tool for Spartan-3 XC3S1500

Jump to solution

Hi,

I have Spartan-3 FPGA, for which I had downloaded Xilinx ISE 14.7.

But it seems that 14.7 does not support Spartan-3. Also for Vivado tool, I read that it's only for Spartan-7 and above.

So which tool should I use for my Spartan-3 FPGA?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
206 Views
Registered: ‎01-22-2015

@kmshah93 

That is correct.  There are no Xilinx tools for Windows-10 that support the Spartan-3.

Mark

View solution in original post

0 Kudos
5 Replies
Highlighted
219 Views
Registered: ‎01-22-2015

@kmshah93 

Welcome to the Xilinx Forum!

Table 2-1 in Xilinx document, UG631, shows the XC3S1500 is supported by ISE v14.7.

Table 1 in Xilinx document, UG973, shows the XC3S1500 is NOT supported by the latest version of Vivado.

Cheers,
Mark

0 Kudos
Highlighted
Observer
Observer
215 Views
Registered: ‎08-12-2019

Hi,

Yes for Windows 10, it does not work. Whats the tool for Windows 10?

Here is the relevant link - https://www.xilinx.com/support/answers/72606.html

0 Kudos
Highlighted
211 Views
Registered: ‎01-22-2015

@kmshah93 

-see supported "Operating Systems" in Chapter 2 of UG631, which include Windows-7 and Windows-XP but NOT Windows-10.

Mark

 

0 Kudos
Observer
Observer
209 Views
Registered: ‎08-12-2019

Hi Mark,

Yes I have read that. So do you mean that Xilinx doesn't provided any tool for Spartan 3 FPGAs in Windows 10?

Just confirming it.

0 Kudos
Highlighted
207 Views
Registered: ‎01-22-2015

@kmshah93 

That is correct.  There are no Xilinx tools for Windows-10 that support the Spartan-3.

Mark

View solution in original post

0 Kudos