UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
258 Views
Registered: ‎01-09-2019

Xilinx AMP Multicore Programming -OpenAMP

I am looking for Xilinx Asymmetric Multi core Programming(AMP) support for Zc702/ZC706 EVAL board. Wanted know how to create Master and Remote Application(Firmware) using OpenAMP on Vivado SDK 2017.2/ Petalinux 2017.2.
Gone through the examples such as OpenAMP Echo test and Matrix multiplication(UG 1186). But I wanted to know how to create our own  AMP Master and Remote Application . Core 0 should run Linux and Core 1 should run Baremental.--Thanks in advance

 

0 Kudos
1 Reply
Moderator
Moderator
202 Views
Registered: ‎05-10-2017

Re: Xilinx AMP Multicore Programming -OpenAMP

 Use the example application as a starting point for building your own application.

You can also look at the 2018.3 user guide, page 23, How to write a simple OpenAMP application

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_3/ug1186-zynq-openamp-gsg.pdf

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos