UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie bonbrian
Newbie
387 Views
Registered: ‎03-25-2019

2D barcode Mark Lot ID not tally with actual body marking

Jump to solution

Is it possible to have different Mark Lot ID on the 2D barcode compare to the actual marked lot ID? Please see attached file.

Hoping for your reply,

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
356 Views
Registered: ‎04-18-2011

Re: 2D barcode Mark Lot ID not tally with actual body marking

Jump to solution

I would guess this should not be likely. 

where did you buy the device from, it might make sense to go back to your distributor to understand this. 

Keith 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1 Reply
Moderator
Moderator
357 Views
Registered: ‎04-18-2011

Re: 2D barcode Mark Lot ID not tally with actual body marking

Jump to solution

I would guess this should not be likely. 

where did you buy the device from, it might make sense to go back to your distributor to understand this. 

Keith 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post