cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
565 Views
Registered: ‎06-15-2018

Acquiring SFP transceivers serial number and alarms etc.

Jump to solution

Hi All,

I need to gather the 10 Gbps sfp optical transceivers serial number, and if possible alarms etc with a verilog implementation. Is there any example code somewhere. I couldn't find any helpful information. There is a SFF comitee Diagnostic Monitoring Interface for Optical Transceivers  paper but it's not simple enough for me to understand. I need an example verilog code.Any information is appreciated.

Thanks in advance.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Observer
Observer
524 Views
Registered: ‎06-15-2018
0 Kudos
2 Replies
Observer
Observer
555 Views
Registered: ‎06-15-2018

Okay So, I've found interface verilog code to use, the problem is there is 24 bit adress bus, but only 256 adresses. which value shoud I give to other 16 bits?

 

interface code: https://www.xilinx.com/support/documentation/application_notes/xapp333_ver.zip

0 Kudos
Highlighted
Observer
Observer
525 Views
Registered: ‎06-15-2018
0 Kudos