cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
263 Views
Registered: ‎03-30-2020

Artix-7 -MIPI CSI Interface for High Speed Interface

Hi,

We are using Artix-7 XC7A200T and interfacing with COM Module from Raspberry Pi and it does support CSI Interface, we want to have high speed interface with COM module in future days through MIPI CSI.

Can you please suggest about supported CSI pin outs available in XC7A200T and recommendations.

Thank you.

 
 
Tags (1)
0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
197 Views
Registered: ‎03-07-2018

Hello @Hemalatha 

Artix-7 FPGA do not have I/O which can natively support MIPI D-PHY. So, you need to refer XAPP894 (v1.0) for D-PHY Equivalent solution : Specifically Page 14 to 20.

Refer Appendix C from PG202 (v4.1) for guidelines on pin assignment and bank rules.

Your post is duplicated : https://forums.xilinx.com/t5/Other-FPGA-Architecture/MIPI-CSI-in-Artix-7-for-Data-Communication/td-p/1098557 

 

Regards,
Bhushan

-------------------------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------------------------
0 Kudos