UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer fabdi
Observer
317 Views
Registered: ‎04-23-2018

FIFO18E1 in virtex6

Jump to solution

Hello

I used from FIFO18E1 in my project.

I have two frequencies (125 MHz and 250MHz) to write and read from FIFO.

My question: is there the special frequency (limited frequency) for FIFO18E1 or not?

Thanks 

Fatemeh

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar u4223374
Scholar
314 Views
Registered: ‎04-26-2015

Re: FIFO18E1 in virtex6

Jump to solution

Yes, check DS152, table 57. Even the slowest Virtex 6 (the -1L speedgrade) can do 250MHz on the FIFOs in the absolute worst-case scenario (ECC enabled). Without ECC it'll do at least 340MHz.

0 Kudos
1 Reply
Highlighted
Scholar u4223374
Scholar
315 Views
Registered: ‎04-26-2015

Re: FIFO18E1 in virtex6

Jump to solution

Yes, check DS152, table 57. Even the slowest Virtex 6 (the -1L speedgrade) can do 250MHz on the FIFOs in the absolute worst-case scenario (ECC enabled). Without ECC it'll do at least 340MHz.

0 Kudos