Showing results for 
Search instead for 
Did you mean: 
Registered: ‎02-27-2019

FPGA/SoC with Simulink

I have acquired the EDDP kit that was reccomended by Xilinx. I also have my own motor control code that is framed out in Simulink. I was wondering what was the best way to communicate and reprogram the EDDP kit so that it can apply what is mapped out on Simulink. I have read up on the system generator however have not gotten definitive answer on if it will be able to work. The board is an ARTY Z7 with a Zynq-7000 SoC.

0 Kudos