cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
wandtdk
Adventurer
Adventurer
820 Views
Registered: ‎12-25-2012

SOME QUESTIONS ABOUT THE PCIE BRIDGE! k7420T-FF901

If I use the "MTG115(G11  supply groups)" as a pcie-bridge, can I set the unsued power pins of the G10 supply groups to the GND? 7 SERIERS K420T-FFG901. 

     In the following pictures,  The  power pins of the G10 groups(no use) are set to the gnd, because the G11 group contains the pcie-bridge (GTX115)

 

1.png2.png

 

3.png

 

       The  power pins of the G10 groups are set to the gnd, because the G11 group contains the pcie-bridge (GTX115)

 

 

 

 

 

 

Tags (1)
0 Kudos
Reply
2 Replies
tenzinc
Moderator
Moderator
766 Views
Registered: ‎09-18-2014

Wandtdk,

 

 

Yes. You should be good to go since the RCAL is also in G11 with your PCI-E bridge. RCAL power group always needs to be up for the transceiver in that RCAL group to work properly.

 

Regards,

Tezz

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Reply
wandtdk
Adventurer
Adventurer
717 Views
Registered: ‎12-25-2012

Thank you!

 

0 Kudos
Reply