UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer srikar@1304
Observer
186 Views
Registered: ‎11-04-2018

TPC encoder/decoder support for ZYNQ 7000 series

Jump to solution

Hello Xilinx Team,

This is regarding the confirmation of an IP support for zynq 7000 series board. Does Turbo Product Code (TPC) encoder/ decoder support Zynq 7000 series FPGA Board? because according to the Xilinx website,, The TPC decoder Ip has been discontinued and TPC encoder does not support Zynq 7000 series. I have attached both the documents for your reference. please confirm with us regarding the support.

Waiting for your reply.

Thanks and regards,

Srikar

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
158 Views
Registered: ‎06-13-2018

Re: TPC encoder/decoder support for ZYNQ 7000 series

Jump to solution

Hello srikar@1304,

Your understanding is correct this IP has been Discontinued. 

Does Turbo Product Code (TPC) encoder/ decoder support Zynq 7000 series FPGA Board? 

the answer is NO. If you open ds211, It has been mentioned that Turbo Product Code (TPC) encoder/ decoder support till Virtex-4 and Spartan-3.

ds211.PNG

Hope this information will help you.

Regards,

Naveen 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if the information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
159 Views
Registered: ‎06-13-2018

Re: TPC encoder/decoder support for ZYNQ 7000 series

Jump to solution

Hello srikar@1304,

Your understanding is correct this IP has been Discontinued. 

Does Turbo Product Code (TPC) encoder/ decoder support Zynq 7000 series FPGA Board? 

the answer is NO. If you open ds211, It has been mentioned that Turbo Product Code (TPC) encoder/ decoder support till Virtex-4 and Spartan-3.

ds211.PNG

Hope this information will help you.

Regards,

Naveen 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if the information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

0 Kudos