UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
174 Views
Registered: ‎01-30-2019

XADC SIMULATION

 Kindly make it clear, if anyone is familiar in this. Am working in xadc of zynq 702. Initially am going to give a analog signal from arbitrary waveform generator to XADC analog pins (VP,Vn / Auxiliary pins). So i can read and write my data in the control register of XADC, the ADC conversion data will be in status register. Now i instantiated my design like as follows
 
1. I have selected my analog port as vp and vn
2. Continuous sampling
3. DCLK=4
4. Bipolar mode
5. Disable all alarm outputs
 
I have attached my design file, kindly go through it. In addition to this i will attach the XADC user guide  https://www.xilinx.com/support/documentation/user_guides/ug480_7Series_XADC.pdf. In page 87 under XADC #( /Initializing the XADC  control registers), go through the .SIM_MONITOR_FILE.
Here what they done is they have given the input in the form of text file. My question is instead of giving the input in the form of text/ csv file,how to assign the analog input to my input pins.
 
 
If anyone know make it clear 
0 Kudos