cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Partha_Das
Visitor
Visitor
520 Views
Registered: ‎12-17-2020

Zynq-700(ZC-702) board motor control

Jump to solution

Hello All,

 

I am trying to run motor control using zynq-7000 AP SOC (ZC-702 evaluation kit). 

However, I am unable to find any document which will help me to start the project. 

Can you please provide me any link for the following documents or any starting procedure for the following tasks.

1. PWM generation using zynq-7000.

2. Electric signal like voltage, current, encoder signal sensing using zynq-7000. 

3. Inverter control using ZYNQ-7000. 

 

Please help to to get started. 

Thanks in advance. 

0 Kudos
1 Solution

Accepted Solutions
katsuki
Xilinx Employee
Xilinx Employee
341 Views
Registered: ‎11-05-2019

Hi @Partha_Das 

Zynq-7000 has a built-in ADC.

System Monitor and XADC.
UG480 - 7 Series FPGAs and Zynq-7000 SoC XADC Dual 12-Bit 1 MSPS Analog-to-Digital Converter User Guide

For ZC702, please refer below.
UG850 - ZC702 Evaluation Board for the Zynq-7000 XC7Z020 SoC User Guide

Thank you.
Don't forget to Reply, Kudo, and Accept as Solution.


Don’t forget to reply, kudo, and accept as solution. If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs

View solution in original post

4 Replies
katsuki
Xilinx Employee
Xilinx Employee
427 Views
Registered: ‎11-05-2019

Hi @Partha_Das 

For Motor Control, our partners offer solutions. There are related links on the following site, so please have a look.

Drives & Motor Control → Smarter Control

Thank you.
Don't forget to Reply, Kudo, and Accept as Solution.


Don’t forget to reply, kudo, and accept as solution. If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
0 Kudos
Partha_Das
Visitor
Visitor
404 Views
Registered: ‎12-17-2020

Hi Katsuki. 

Thank you for reply. 

Is it possible to provide any link where we can find analog signal sensing of ZC-702 board. 

Thanks in advance 

katsuki
Xilinx Employee
Xilinx Employee
342 Views
Registered: ‎11-05-2019

Hi @Partha_Das 

Zynq-7000 has a built-in ADC.

System Monitor and XADC.
UG480 - 7 Series FPGAs and Zynq-7000 SoC XADC Dual 12-Bit 1 MSPS Analog-to-Digital Converter User Guide

For ZC702, please refer below.
UG850 - ZC702 Evaluation Board for the Zynq-7000 XC7Z020 SoC User Guide

Thank you.
Don't forget to Reply, Kudo, and Accept as Solution.


Don’t forget to reply, kudo, and accept as solution. If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs

View solution in original post

katsuki
Xilinx Employee
Xilinx Employee
300 Views
Registered: ‎11-05-2019

Hi @Partha_Das 

I've provided some information, if already issue has resolved, Kudo, and Accept as Solution.
If you want to repeat a new question, please post a new one.

Thank you.
Don't forget to Reply, Kudo, and Accept as Solution.


Don’t forget to reply, kudo, and accept as solution. If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
0 Kudos