UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
336 Views
Registered: ‎04-01-2019

Zynq reset

Jump to solution

Hi, I have Zynq processor. Its booting from SPI. When I reconfigure it with the SDK and run the software it doesn't work correctly (ie not the same as when its booted from SPI). Is the issue that the system has already been booted from SPI and that is preventing me from running the design from the SDK. If so is it possible to stop it booting from SPI without erasing the SPI (its not possible to change the boot links as they've been hardwired to boot from the SPI)? 

 

0 Kudos
1 Solution

Accepted Solutions
Contributor
Contributor
295 Views
Registered: ‎04-01-2019

Re: Zynq reset

Jump to solution

I erased the SPI. This fixed it :)

View solution in original post

0 Kudos
1 Reply
Contributor
Contributor
296 Views
Registered: ‎04-01-2019

Re: Zynq reset

Jump to solution

I erased the SPI. This fixed it :)

View solution in original post

0 Kudos