UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
8,252 Views
Registered: ‎04-11-2016

Config all gtx transceiver with different clock and line rate

We have an application using all 8 transceiver of Kintex 7 but they are running at different line rate and different reference clock.

May I configure the transceiver like that?

From the Wizard, the line rate and reference clock (CONFIG.gt0_val_tx/rx_reference_clock ) seems to be common for all GTX_X?Y?, even I can choose the TX/RX clk source (CONFIG.gt?_val_tx/rx_refclk)?

0 Kudos
1 Reply
Moderator
Moderator
7,551 Views
Registered: ‎02-16-2010

Re: Config all gtx transceiver with different clock and line rate

There will be only 4 different reference clocks available with two quads.

Check your line rate/refclk combinations again. Some times two different line rates can have same refclk input.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos