UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
3,636 Views
Registered: ‎05-15-2017

Example design for Ethernet Interface

Hi,
Is there an example design available to prove/realise the Ethernet interface on ZC 702 board. I found examples for Zedboard 7000 but none for Zynq 702 board.

 

 

Tags (3)
0 Kudos
2 Replies
Moderator
Moderator
3,603 Views
Registered: ‎08-25-2009

Re: Example design for Ethernet Interface

Hi @ravikanth1984, xapp1026 and xapp1082 have the examples you are looking for:

https://japan.xilinx.com/support/documentation/application_notes/xapp1026.pdf

https://www.xilinx.com/support/documentation/application_notes/xapp1082-zynq-eth.pdf

"Don't forget to reply, kudo and accept as solution."
0 Kudos
Adventurer
Adventurer
3,598 Views
Registered: ‎09-22-2016

Re: Example design for Ethernet Interface

@ravikanth1984 The ethernet is already connected internally within the Zynq board. 

You just need to add the Zynq IP and run it in the SDK. Check out the lwip example. 

 

 

0 Kudos