UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
5,848 Views
Registered: ‎11-28-2011

ODDR CE in Zynq

Have a weird issue.  I utilize three ODDR's, of which all three I control the CE and the clock frequency of the clocks going into the ODDR.  The CE does not work at all on one of the ODDR's.  I have tried to swap out the control signal which controls the CE, and also tried forcing the CE to 1'b0 and the ODDR still doesn't disable it's output. Synthesis and Implementation shows the register bit tied to the CE.

Tags (2)
0 Kudos
1 Reply
Highlighted
Adventurer
Adventurer
1,881 Views
Registered: ‎01-28-2013

Re: ODDR CE in Zynq

I have used the CE bit and it works just fine. Could you post your code snippet here?

0 Kudos