12-03-2017 09:15 PM
I am working on Zynq Ultrascale+ MPSoC EG series.
I need some clarification on PCIE ps side,that is how to write data from PL-DMA to PS-PCIE??
12-03-2017 09:25 PM - edited 12-06-2017 10:38 PM
You can find some example here
youu can check this XAPPs as well
|Provides an example that demonstrates how to configure and use the DMA in the Controller for PCI Express® when configured as a Root Port.|
Hope it may help you
12-18-2017 11:45 PM
Thank you for your reply..
but which datasheet are mentioned in the reply those are all related to zynq7000.
but i am working on Zynq Ultrascale+ MPSoC device. there are no exported ports of pcie express in Zynq Ultrascale+ MPSoC IP in vivado17.2.
i am not under standing that how to connect PL-DMA to PS-PCIE.