UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor vineeshvs
Visitor
54 Views
Registered: ‎11-26-2018

Mapping PCIe BAR regions of size greater than 4MB

Hi,

We are developing a system with a custom processor, Microblaze and some peripherals in VC709 FPGA using Xilinx Vivado. We are using two 'PCIe : BARs' in 'AXI Bridge for PCI express gen 3'.

The changes we make in the block configuration of the PCI express block are not getting reflected on the host side.

For example, when we set the BAR0 for 2GB and BAR1 for 2MB, we get two regions of 4KB and 4MB. And this doesn't change when we tried varying different BAR combinations.

	$lspci -vv
	0a:00.0 Memory controller: Xilinx Corporation Device 7038
		Subsystem: Xilinx Corporation Device 0007
		Physical Slot: 3
		Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
		Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
		Interrupt: pin A routed to IRQ 16
		Region 0: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K]
		Region 1: Memory at fb800000 (32-bit, non-prefetchable) [size=4M]
		Capabilities: <access denied>
		Kernel modules: riffa

Could somebody explain this behavior? Is it related to the OS handling of PCIe peripherals?

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
43 Views
Registered: ‎08-02-2007

回复: Mapping PCIe BAR regions of size greater than 4MB

this is not expeted

which version of vivado are you using?

you can check  the BAR size in the IP source file to check if the correct value is writen to

 

------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------