cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Anonymous
Not applicable
10,292 Views

AXI - PCIe on ZC706 Zynq Board

Jump to solution

Hi,


I'm working with the AXI - PCIe bridge in the ZC706 board. The board will be endpoint connection only.


I'm looking for information concerning the host driver (I mean, the driver in the PC in which the PCIe is connected to). I'll be using a debian system and I'm wondering if there's any support from Xilinx for this design.

 

Thanks for the support.

 

Tiago

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar
Scholar
17,719 Views
Registered: ‎02-03-2010

Re: AXI - PCIe on ZC706 Zynq Board

Jump to solution
There are no reference designs for AXI PCIe IP with Host drivers.

I would suggest you to take a look at the Targetted referance design fro KC705 connectivity kit.

I hope you can modify for your application.
--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------

View solution in original post

0 Kudos
3 Replies
Highlighted
Scholar
Scholar
17,720 Views
Registered: ‎02-03-2010

Re: AXI - PCIe on ZC706 Zynq Board

Jump to solution
There are no reference designs for AXI PCIe IP with Host drivers.

I would suggest you to take a look at the Targetted referance design fro KC705 connectivity kit.

I hope you can modify for your application.
--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------

View solution in original post

0 Kudos
Highlighted
Anonymous
Not applicable
10,226 Views

Re: AXI - PCIe on ZC706 Zynq Board

Jump to solution

Thanks for the reply.

 

We're developing a driver based on a previous PCI application we had..

Thank you,

 

Tiago

0 Kudos
Highlighted
Observer
Observer
2,495 Views
Registered: ‎06-26-2014

Re: AXI - PCIe on ZC706 Zynq Board

Jump to solution

Hi,

Where can we find the ZC706 PCIE example design? Could you give the link? Thank you so much.

I am a freshmen of FPGA. But I know everything is ok if I work hard.
0 Kudos