cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
gdliu
Visitor
Visitor
8,143 Views
Registered: ‎08-10-2014

CDMA does not work in a axi pcie design

Jump to solution

I'm using VIVADO, I find that the CDMA pcie design will always failed to work

RP chip does not receive any TLPs from FPGA

i tried other EP chips andthey always worked fine 

vivado is used 

0 Kudos
1 Solution

Accepted Solutions
liy
Xilinx Employee
Xilinx Employee
14,465 Views
Registered: ‎08-02-2007

Please check out whether the bus master bit  is set

If you are using v2.3, try the file in the attachment  to replace  the original ones 

 

------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------

View solution in original post

1 Reply
liy
Xilinx Employee
Xilinx Employee
14,466 Views
Registered: ‎08-02-2007

Please check out whether the bus master bit  is set

If you are using v2.3, try the file in the attachment  to replace  the original ones 

 

------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------

View solution in original post